1

It is not that uncommon for people to get excited about clawfoot tubs, steam showers or designer sinks when they get down to remodeling their bathrooms. The majority of homeowners and contractors usually pay most of their attention to these bathroom fixtures, as they can substantially add to the overall aesthetic look and feel of the bathroom and functionality.

However, not many people pay enough attention to the humble toilets. For that reason, we will focus on some of the most important factors to consider when buying a new toilet. If you plan on buying one yourself, you can use these as your guiding points.

Basic designs

The majority of modern toilets usually come in two basic designs, the one-piece, and two-piece designs. The two-piece models are the most common models, as well as the cheapest ones. They feature a separate bowl and tank. On the other hand, one piece toilets have their tank built into the back of the bowl. They have a more compact profile, are easier to clean and usually more expensive.

Seat size and shape

Toilet bowls can come in either elongated or round models. Elongated seats are usually around 2 to 3 inches longer and feature a larger surface area. As a result, they can feel a bit more comfortable than the round ones. Round models are smaller and more suitable for tight spaces. But, if you have enough available space, getting an elongated bowl would be a better idea.

The flush mechanism

22The majority of modern toilet models utilize a gravity flush system. They rely on the water pressure in the tank, as well as the amount of water in the bowl, so as to force the water into the pipes. Older toilet models mostly relied on the tank’s height, in order to increase the pressure. Gravity flush toilets are typically the least expensive models.

In the last few years, however, pressure-assisted mechanisms have become increasingly popular, as well. These feature a cylinder of pressurized air, which is used to provide force to the entire mechanism. These are mostly used in commercial bathrooms, as they have a forceful, loud flush.

The most modern toilets available today are, without a doubt, the dual-flush models, which are specifically designed to save water. These offer two flush modes; a “full flush” mode for solid waste, and a “half-flush” mode for liquid waste. Dual-flush toilets allow their users to adjust the amount of water used for heavier or lighter loads.

The toilet trapway

This component is the part through which waste and water exit. Usually the bigger it is, the better. A bigger trapway is much less prone to clogging and ensures a better flushing action. Additionally, when you find yourself in a store, looking for toilets, don’t forget to ask if a certain trapway is fully glazed. These models make the bowl much easier to clean and can substantially improve flushing performance.

Means of attachment

2The choice between a wall-mounted or a floor-mounted toilet will mostly depend on the plumbing system in your bathroom. If your bathroom features a floor-discharge drain line, you will have to bolt the toilet to the floor. On the other hand, if there is a wall-discharge drain line in your bathroom, you will have to go with a wall-mounted model. You can easily find both pressure-assisted and gravity models in both attachment designs.